How to Plan Your Deer Fence Project

Step-by-step Instructions to help you start your deer fencing project

The first step in planning your fence project is designing the layout of the fence. This includes deciding where the fence should go, the location of the gates, marking the fence line and drawing a diagram.

Design Your Fence Line

Look for areas where there is minimal terrain changes.
For wooded landscapes look for cleared areas when possible to minimize the amount of brush clearing.
Back yard and garden fences can use building structures (including your house) to complete the enclosure.
The best fence system is fully enclosed with no openings, including the driveway.
The fence can weave throughout trees.
Trees can be used in place of posts.
Install a post if using a tree at a corner or termination point.

Decide Where the Gates Will Go

Keep in mind the size of any equipment or machinery that will be brought into the enclosed area.
Access gates work best on level areas along the fence line.
Driveway gates should be approximately 2 feet wider than the driveway.
Driveway gates can be automated. We recommend Mighty Mule automated gate systems.
An additional access gate can be added next to driveway gates for non-vehicle access. (Ideal for driveways with large, non-automated gates)

Mark and Measure Your Fence Line

Mark your fence line using flags, spray paint or surveyor stakes.
Measure your fence line with a large open reel tape measure. Don’t have a large enough tape measure? Follow the directions below to get a rough measurment.